If you should examine your tiles, a little closer, come and look at the tile grout, a very interesting question to mind, namely: "Since the floor mortar is so incredibly transparent, why they do use something like tiles, dirty do so may easily? "
They would jump into this question. The fact is that the grout porosity extends far beneath the surface until the substrate nature and can best be described as a sponge, the dirt, grime and absorbs described washing --It is exposed every time you wipe the floor. To get the grout clean with conventional chemicals, is both a lengthy and difficult task, and a stronger chemicals cause incredible damage to the mortar.
Grout stain is also evident on lighter mortars, which is why darker types often used to lay tiles (masking the future build up of dirt.) But even with dark-colored versions can, you can easily see the dirt in areas where more traffic occurs. When cleaning isis incredibly difficult to cover all areas from the soil, there are always areas that are overlooked.
It is a fact that no tile grout cleaner penetrates only destroying acid and lift the dirt to 100%. To prevent staining, you can in. grout sealer to prevent the settling of dirt, but grout sealer can be applied again at regular intervals throughout the life of the floor tested. So, back to cleaning is a problem, such as cleaning tile grout thoroughly recommended before sealing grout (otherwise seal the dirt in the ground.)
Grout is not to be very tough, so harsh chemicals are used, it breaks easily and lose structure. Permeability also increases due to improper use of chemicals, so the problem worse. Once the structure is lost, grout repair is impossible. So the only possibility is to extend the life of mortar to use a proper cleaning tiles and methods.
How to clean without grout-cleaning products, the Ultimate Grout Cleaner --> TEAM
Cleaning with water is a new concept for you, so it's good to get a better understanding of their functioning, participated along with the detergent.
First, steam comes in different forms. In a normal pressure (in an open vessel) water can not be heated above 100 degrees Celsius. Even if you have to increase the heat, the water temperature does not rise - all that happens is more steam is produced, which escapes the ship.
However, if the vesselsealed, you can heat the water a much higher temperature before it starts to boil. This is because the amount of energy needed to be raised against the higher pressure vapor form. Water that can produce this kind of steam, heated to temperatures of about 180 degrees Celsius.
The type of steam under high pressure is so dry steam vapor known. This kind of steam is very different than, say, "Everyday" steambecause moisture is very low (5%), and if it has released more volume, dry steam vapor. Only one liter of water under pressure to produce very large amounts of dry steam heated steam. Since dry steam vapor molecules smaller than water has, it can penetrate to much greater scale and give a much deeper clean. Much more, because steam is very hot at the transfer station, it makes the space expand, much help in the release of dirt.
Oneof the common misconceptions about steam cleaning is that the steam under high pressure, because it comes prepared at high pressure. This is not the case, as the steam released in a very easily controlled. It is the breath of the steam (it cleans unless you really need one), but rather the way in which the vapor is in a position deep in the grout can penetrate and lift dirt and grime.
Dry cleaning is not able to really penetrate very deeplysince water is used. But dry steam vapor molecules are able to penetrate the dirt and collect up to alleviate deep into the mortar pores, redness everything to the surface, without the structure in every joint. Even with the use of steam for cleaning grout, a small brush is usually attached to the steam lance. The mechanical action of these Brush replaces the top layer of dirt and harder drives the rising dirt out of joint, so that they can not penetrate backin.
It is also important to note that smaller domestic steam cleaning machines steam vapor produced at a much lower pressure and temperatures in comparison with a commercial steam cleaning means. That, that they may not be clean mortar to the extent that a commercial machine can . steam-cleaning machines that are in a 6-bar or more, the most effective when it comes to cleaning grout.
ไม่มีความคิดเห็น:
แสดงความคิดเห็น